Guys I pick up a Pin Gage set M2 - other day which few had little surface rust on them which I cleaned up best I could.Well having a set from .251-.500 there were a few to be cleaned and all was spray with some rust prevention.These have been stored in it original container but they still had some rust on them.What I was wondering guys is things such as pin gages,block gages,squares or anything that you want to stay rust free what do you do?Lets say these pin gages,my first thought is keep them lube up with something then is there something that can lay over the top of them that been soak this a lube spray say T9?What I did till I hear back from you guys,is I use a product here in pick,spray a rag then wipe them down.But I want to lay over the top a piece of brown paper sack over the top and soak it with the same spray.Since pin gages in hobby shop does not get used that much I just want a good plan for storing them and not open the box up find they are all rusty.What is ya'll plan