- Joined
- Nov 27, 2012
- Messages
- 7,855
Just sharing these again in case some of you aren't aware. These are great brushes for use with the mill. Perfect for clearing off the table & cleaning out the t-slots. It even comes with a t-slot scraper mounted on the front. I took mine off since I have t-slot covers & don't have a use for it. Stiff bristles that lasts a long time. I purchased 2 from Enco like 7 yrs ago & I'm still using the 1st one.
Again I purchased mine from Enco but MSC still sells them under their Gibraltar line for $3.61. Mcmaster also sells the Gordon brand ones but they are quite a bit more expensive at $15.38. The Gibraltar ones are made in China, the Gordon ones I'm assuming are USA.
MSC p/n 00351601
Mcmaster p/n 71855T21
Gordon 433PSC
Again I purchased mine from Enco but MSC still sells them under their Gibraltar line for $3.61. Mcmaster also sells the Gordon brand ones but they are quite a bit more expensive at $15.38. The Gibraltar ones are made in China, the Gordon ones I'm assuming are USA.
MSC p/n 00351601
Mcmaster p/n 71855T21
Gordon 433PSC