- Joined
- Mar 25, 2013
- Messages
- 4,641
You know that could actually work with the mill, although I would not trust the tram!
Yes I could turn the cylinder but I think a new cylinder is in order.
I had one other idea. I could use the original cylinder (or a new one) and add support at the top of the cylinder:
Notice the ears on the C frame with 1/2" holes. These are crying for all thread extended up to a plate over the cylinder.
Robert
Yes I could turn the cylinder but I think a new cylinder is in order.
I had one other idea. I could use the original cylinder (or a new one) and add support at the top of the cylinder:
Notice the ears on the C frame with 1/2" holes. These are crying for all thread extended up to a plate over the cylinder.
Robert