My Sterling drill grinder

I only see a on/off button box. the only sticker I found was low voltage/high voltage wiring diagram. The web site states 220v 3ph as an option from the 110v.
 
So you don’t have the sticker on the back like this ? Mines 3/4 Hp. 230/460 volt 3-phase
 

Attachments

  • image.jpg
    image.jpg
    230.9 KB · Views: 12
This is the only sticker it has. This machine is from 1998....
 
This is the only sticker it has. This machine is from 1998....
Yeah that’s not really helping anyone with the power supply for the motor
 
I hope my electrician can figure it out.
 
Electrician came over, he says it's a 220v 3ph, but is wired with a 3 wire 6-30 plug. He was mumbling a lot so I didn't bother him, he is going to rewire the plug for my RPC.
 
Electrician came over, he says it's a 220v 3ph, but is wired with a 3 wire 6-30 plug. He was mumbling a lot so I didn't bother him, he is going to rewire the plug for my RPC.

Mumbling and swearing, I'll bet.
 
Back
Top