POTD- PROJECT OF THE DAY: What Did You Make In Your Shop Today?

Working on making the wood lathe look better... and fixing the pulley setup. New shaft order to replace the one there now. It is shorter and the pulleys were installed incorrectly by previous owner...

Parts removed, degreased, cleaned, sanded, and painted gray again... Bottom board was sanded to get rid of all the paint it had in some areas and a coat of satin clear polyurethane applied... Top board was in much better condition. So only cleaned that and installed back.

IMG_6716.jpeg
 
Two projects. One, I finished up a collet rack for my ER 32 violets using a jalapeno chili popper rack. It was supposed to go on the wall, but after much work I realized that was a dumb idea as they kept falling out. So now it's in the tool box just under where I planned to put it on the wall :)View attachment 413540
Just had to push the stuff already in it over to the left..

Also picked up another foster pup after Elektra got adopted last week, the sister of Bat Ears (Elektra). Hopefully we'll get her on her way to a new home soonView attachment 413541View attachment 413542View attachment 413543
You’re a stronger man than me. I’m a multiple “foster failure” father….
 
I cobbled up a tube bending die for a HF bender. It did a good job on 1/2" 0.065 steel tubing. I started with a piece of 5-1/2" OD pipe and wrapped two pieces of 3/8" square stock around it. It is a square bottom groove and probably would not work well on real thin tube but is doing the job I built it for.
 

Attachments

  • bender.jpg
    bender.jpg
    269.8 KB · Views: 19
  • IMG_1634.JPG
    IMG_1634.JPG
    167.6 KB · Views: 19
Working on making the wood lathe look better... and fixing the pulley setup. New shaft order to replace the one there now. It is shorter and the pulleys were installed incorrectly by previous owner...

Parts removed, degreased, cleaned, sanded, and painted gray again... Bottom board was sanded to get rid of all the paint it had in some areas and a coat of satin clear polyurethane applied... Top board was in much better condition. So only cleaned that and installed back.

View attachment 413544
I want to know what kind of lathe. That looks fabulous.

Sent from my SM-G970U using Tapatalk
 
1963 Delta 1460 (46-460) - documenting all repairs on the Vintage Machines Forum
That's a lot like my wood lathe (1942 Dunlap), you just have better clearance and a much nicer stand. As to the pulleys you mentioned in the other forum, you can cast your own pulleys if push comes to shove, or make/machine them on your metal lathe. Looks good!

Sent from my SM-T500 using Tapatalk
 
here's another pic of goofball #2, just for fun :)
View attachment 413592
Our other boy:

5BB94931-98FC-484D-B381-9CE022B2CF29.jpeg

He’s a pure though, Greater Swiss Mountain dog. 145 lbs. Working breed, used to haul milk carts around the Alps, guard sheep, etc. Record cart pull for a Swissy is just a tick over 5000 lbs.

But he’s also sort of a rescue.

He was born with a heart defect. long story short, the entire left side of his heart is a total s-show. Holes, murmurs, misformed valves, strange tendon structures in the left atrium, etc. You name it, he’s got it. Vet figured he didn’t get enough nutrients in the womb, as the mother had a litter of 17 (including ours) and 2 stillborn. Figures he might have been on the outer edge of where the uterine lining was so his umbilical didn’t get as much as his body needed to grow properly.

Cardiologist only gave him a year or less (was actually indicating weeks to months). The breeder was a bit stuck: he couldn’t be “fixed” because of his condition (can’t be anesthetized) and she had two breeding females (one was his mother).

Multiple people on the wait list passed him up because of his heart and the only people that wanted to take him wanted to run him or work him, which would have killed him in short order.

The wife and I have had dogs with heart defects before, so we knew what we were getting into. The breeder was happy to just give him to us (and waive her fee) to get him out of her care and into someone’s who would take care of him properly. The breeder wouldn’t even take an offer to pay for his vaccinations, citing that she knew he was going to be expensive to keep, medically.

He just turned 5 last month.

We’ve got him on beta blockers and limit his exercise so as not to over strain his heart. I also make sure he gets lots of touch and interaction each day. Not sure if that helps, but I can’t help but feel it does as I believe he always feels like he belongs and is “special”.

Not one vet can explain how he’s beating the odds and they all want to “monitor” him. Ultrasounds, mri, ekg, etc because his case is so unusual. Both the severity of his defect and the fact he’s lived so long with it.

But I’m not looking a gift horse in the mouth, nor am I subjecting him to the stress of those procedures (he goes nuts when he’s restrained). They can’t fix him so they really just want to use him as a lab rat/learning tool.

I get the “greater good” argument, but I see no need to stress him that way. My priorities are him just living what life he’s got left and enjoying what time we have left….together.

After all, he is “my boy”. Have to protect him.

:)


/hijack
 
Last edited:
Back
Top