CLICK HERE 1st For List of Alpha Sorted File Categories

CLICK HERE For List Of Categories. Going to the appropriate Category or Folder first will reduce the number of files and number of pages of files significantly, making it much easier to find something. Note that some Categories have Sub-Categories and many of those have Sub-Sub-Categories below them, Etc. Always go to the bottom of the Tree before you start searching the files list. Note also that if there is an inverted caret (^, but pointing down instead of up) to the left of any Category, that means that there are Sub-Categories below your present position in the tree which should shorten your search time. Disclaimer: there is no way in which to re-sort the files lists. Sorry. The only sorting is that the most recently uploaded file will be at the top of the files list, followed by the second most recent, etc. To use the search engine to search Downloads, first make certain that you have the Downloads tab selected. Then click Search on the top tool bar. A small window should appear. Click the up/down arrows to the right of "Everywhere" and select "Resources". Enter your search criteria and click Search at the bottom of the small window. Clicking on one of the results will take you to that file. To repeat, you have to start over by clicking Downloads again because after one search, the system reverts to whatever your normal start-up screen is and trying it again without first clicking Downloads again will search only the post threads.

Categories

Top downloads

I wish I had seen this when I was first trying to make sense of lathe tooling
0.00 star(s) 0 ratings
Downloads
225
Updated
SB How To Run a Lathe - 1966 27th Edition (56).pdf
0.00 star(s) 0 ratings
Downloads
175
Updated
1936 - What to Make on the Lathe - Bulletin No 34.pdf
0.00 star(s) 0 ratings
Downloads
164
Updated
5.00 star(s) 1 ratings
Downloads
146
Updated
The modern practice of American machinists & engineers
0.00 star(s) 0 ratings
Downloads
140
Updated
0.00 star(s) 0 ratings
Downloads
140
Updated
Cut any number of gear teeth using any set of index plate or rotary table
4.00 star(s) 1 ratings
Downloads
139
Updated
Article for HSM magazine by Donna Sparber, wife of Rick Sparber
5.00 star(s) 1 ratings
Downloads
132
Updated
Machine Shop Tools And Operations 5Th Ed
0.00 star(s) 0 ratings
Downloads
131
Updated
5.00 star(s) 2 ratings
Downloads
112
Updated
Includes threading chart & both QCGB's.
5.00 star(s) 2 ratings
Downloads
111
Updated
5.00 star(s) 2 ratings
Downloads
109
Updated
Description of Versions 0 & 1 and changes in Versions 2 through 9
0.00 star(s) 0 ratings
Downloads
108
Updated
0.00 star(s) 0 ratings
Downloads
106
Updated
Ball_Turning_Toolpost_-_Complete.pdf
0.00 star(s) 0 ratings
Downloads
105
Updated
0.00 star(s) 0 ratings
Downloads
105
Updated
This will calculate threading information for Vee, Acme, Stub Acme threads for Class 2 fits.
0.00 star(s) 0 ratings
Downloads
104
Updated
Machinist Reference Tables Combined.pdf
0.00 star(s) 0 ratings
Downloads
103
Updated
0.00 star(s) 0 ratings
Downloads
100
Updated
0.00 star(s) 0 ratings
Downloads
98
Updated
How to pick correct MOLO version based on lathe model number.
0.00 star(s) 0 ratings
Downloads
96
Updated
5.00 star(s) 1 ratings
Downloads
95
Updated
Hobby Lathe Article From Model Engineer.pdf
5.00 star(s) 1 ratings
Downloads
94
Updated
0.00 star(s) 0 ratings
Downloads
94
Updated
Lathe turning tools.
0.00 star(s) 0 ratings
Downloads
93
Updated
5.00 star(s) 1 ratings
Downloads
92
Updated
SCRAPING_by_Gerlah.pdf
0.00 star(s) 0 ratings
Downloads
91
Updated
Screw_Thread_Chart.pdf
0.00 star(s) 0 ratings
Downloads
86
Updated
04 - Foundrywork For The Amateur.pdf
0.00 star(s) 0 ratings
Downloads
86
Updated
0.00 star(s) 0 ratings
Downloads
85
Updated
0.00 star(s) 0 ratings
Downloads
83
Updated
0.00 star(s) 0 ratings
Downloads
82
Updated
Machinist-Course-Milling-Machine-Operations.pdf
0.00 star(s) 0 ratings
Downloads
82
Updated
First Year Lathe Work - 1917.pdf
0.00 star(s) 0 ratings
Downloads
80
Updated
How to Make Bushings for Automobiles, Buses and Trucks.
0.00 star(s) 0 ratings
Downloads
79
Updated
0.00 star(s) 0 ratings
Downloads
79
Updated
Craftsman Lathe 12 101-07403 12X18-36 Illus Parts Rev11.pdf
5.00 star(s) 1 ratings
Downloads
79
Updated
1936 - How to Cut Screw Threads in the Lathe - Bulletin 36A.pdf
0.00 star(s) 0 ratings
Downloads
78
Updated
Another Ball Turnner for lathe PS 1922.pdf
0.00 star(s) 0 ratings
Downloads
78
Updated
0.00 star(s) 0 ratings
Downloads
77
Updated
0.00 star(s) 0 ratings
Downloads
77
Updated
5.00 star(s) 1 ratings
Downloads
76
Updated
Furnace building plans.pdf
0.00 star(s) 0 ratings
Downloads
76
Updated
Dividing head chart 2015-03-17
dividing index chart
0.00 star(s) 0 ratings
Downloads
75
Updated
0.00 star(s) 0 ratings
Downloads
75
Updated
shopcalc.exe 2015-05-14
shopcalc.exe
5.00 star(s) 1 ratings
Downloads
75
Updated
0.00 star(s) 0 ratings
Downloads
75
Updated
0.00 star(s) 0 ratings
Downloads
74
Updated
Appears to be usable on the other two models.
0.00 star(s) 0 ratings
Downloads
74
Updated
Back
Top