- Joined
- Sep 29, 2010
- Messages
- 1,558
When I got this thing it had sit out side a long time. The inside of the spindle was rusty, I took the head apart this morning and cleaned up the inside of the spindle. Wire brushed and polished it, I've never had or use a 5C collet adapter.
When I put in in place it won't go all the way in about 3/16 from being in. I think I have the right one I even blued it to see if there was any burs in the spindle.
Anyone got any ideas?
Paul
When I put in in place it won't go all the way in about 3/16 from being in. I think I have the right one I even blued it to see if there was any burs in the spindle.
Anyone got any ideas?
Paul