- Joined
- Feb 22, 2013
- Messages
- 159
Well after too many times of either not hearing my cordless phone or bringing it into the shop and forgetting to take it back upstairs I purchased a phone for the shop. I went a little different. Got a nice old panel mount phone with a mechanical ringer that's loud as hell. No more not hearing that anymore. I had to fab a housing to mount it in the wall and do a general taking apart and cleaning of all the mechanicals. Unfortunately I have VoIP so I cannot dial out because my phone modem does not recognize pulse dialing. It answers and rings fine though. I have a pulse-to-tone converter coming to make it 100% functional again.
![IMG_0954.JPG IMG_0954.JPG](https://www.hobby-machinist.com/data/attachments/57/57624-551c92ddc08409aa6fa20de40643d3ac.jpg)
![$_57.JPG $_57.JPG](https://www.hobby-machinist.com/data/attachments/57/57621-6455be8f18bc150f042a6f2c9466d8f6.jpg)
![823568048_o.jpg 823568048_o.jpg](https://www.hobby-machinist.com/data/attachments/57/57622-f83e844b49437e2a919adb077d19d1ca.jpg)
![IMG_0950.JPG IMG_0950.JPG](https://www.hobby-machinist.com/data/attachments/57/57623-d4d684e7ceaa1d393291930254dbc3bf.jpg)
![IMG_0954.JPG IMG_0954.JPG](https://www.hobby-machinist.com/data/attachments/57/57624-551c92ddc08409aa6fa20de40643d3ac.jpg)