- Joined
- Mar 29, 2016
- Messages
- 22
Forgot to mention one set made from steel angle iron, but be sure to mill out the inside corner of the angle
so it sits flat on your jaws. then clamp a piece of paper between the jaws , and drill and tap for a thread that you need
Really handles working on threaded parts great, as you clamp on the threads. The paper is only to space the jaws apart during tapping.
so when the paper is tossed, the bolt or whatever gets clamped real good with no thread damage !
so it sits flat on your jaws. then clamp a piece of paper between the jaws , and drill and tap for a thread that you need
Really handles working on threaded parts great, as you clamp on the threads. The paper is only to space the jaws apart during tapping.
so when the paper is tossed, the bolt or whatever gets clamped real good with no thread damage !