Becker #2 Mill

[ThinWoodsman]

In regards to the taper, measure and compare to standard taper sizes. Not sure how you'll get to the inner small diameter, but maybe the length and large diameter will be sufficient.

 

[HarryJM]

You can download the manual at http://vintagemachinery.org/pubs/detail.aspx?id=18512 and join owwm.org while your at it.

 

[byrdman]

Thanks, don't know how I missed that. I was really getting into it and then it abruptly ended but i'm going to see if I can find a full book. Thanks again.