- Joined
- Nov 26, 2017
- Messages
- 1,517
Congratulations on the new tool. Looks like you got a really good deal with all the tooling.
Ya! I actually don't have a good idea on what to do with some of it! I'm probably going to have to find someone in the area to buy some of it.Congratulations on the new tool. Looks like you got a really good deal with all the tooling.
Well, I am just North of you. Would very much appreciate a heads up once you decide what you don't need. I am gathering all my equipment and tooling for my soon to be retirement shop.Ya! I actually don't have a good idea on what to do with some of it! I'm probably going to have to find someone in the area to buy some of it.
I'll probably use the mills/vblocks, probably the dividing head, coax head, and hold-down kit , but a lot of that stuff ends up being duplicates for me. Though, those almost look like 1/4" parallels, which seem like they'd be very handy!
Anyone i the PacNW wants some inexpensive gear, keep an eye out, I'll have a lot of this available once I get through all of it!
Well, quite a bit north of me Looks like about a 4 hr drive! Once I get everything home and picked through, I'll let you know. I know for a fact I won't need 2 more vises! Though perhaps 1 will go with my old mill.Well, I am just North of you. Would very much appreciate a heads up once you decide what you don't need. I am gathering all my equipment and tooling for my soon to be retirement shop.
But at your leisure. You may want to wait until you get everything set up. You could find some items that it is good to have two or more of.
Well, the drive home ended up being an adventure. The plastic pallet I used (rated for 9k lbs on a flat surface :/) started to bend/break on the drive home. I ended up stopping frequently to tighten the ratchet straps to make sure it didn't move!ade it back fine, just an adventure! Now I gotta figure out how to unload it!Very Nice! Looks like you had it tied down really good.
Me too!Birmingham knee - type mill milling machine, model BPV -1054 - C., | eBay
Birmingham knee - type mill milling machine, model BPV -1054 - C.,,Mitutoyo dro. Condition is "Used". The mill has had less than 10 hours of use. It has been in storage in a heated warehouse for several years.www.ebay.com
If this is the one , I would grab it .