- Joined
- Mar 26, 2018
- Messages
- 8,407
I bought a Shars diamond wheel for my surface grinder. As many of you have discovered, the texture has facets that need to be trued/cleaned up.
This is my progress so far.
The bearings fit well. One is a slight press fit, the other is a nice snug fit.
The spindle is my project for tomorrow.
This is my progress so far.
The bearings fit well. One is a slight press fit, the other is a nice snug fit.
The spindle is my project for tomorrow.
Attachments
-
2D4DE7C8-18F6-4631-9D89-770CD2C43BC8.jpeg701.5 KB · Views: 52
-
C2828B04-6E38-4ABF-A674-4163D4B2D79E.jpeg900.1 KB · Views: 55
-
9571D440-3B27-4502-A371-60EC1E11AB66.jpeg998.3 KB · Views: 55
-
C33C0BA8-EFA9-4F89-977E-C644591C0E76.jpeg795.9 KB · Views: 53
-
939CB9FF-863A-4207-A538-90C1022C60EA.jpeg700.7 KB · Views: 64