O
ome
Forum Guest
Register Today
Hi guys,
I just got my 6 inch 3 jaw on the lathe, and measuring, it looks very close for a 8 inch when the apron and saddle is brought up close to the spindle.
I had wanted a 6", but buck co stopped making a 6" with reversible top jaws, only solid jaws.
Any advice as always is greatly appreciated.
Thanks,
jon
I just got my 6 inch 3 jaw on the lathe, and measuring, it looks very close for a 8 inch when the apron and saddle is brought up close to the spindle.
I had wanted a 6", but buck co stopped making a 6" with reversible top jaws, only solid jaws.
Any advice as always is greatly appreciated.
Thanks,
jon