- Joined
- Jul 29, 2014
- Messages
- 2,737
Polycarbonate can also be glued along clean mitered or beveled edges...it's a very strong and more or less invisible joint.
What kind of glue would you use?Polycarbonate can also be glued along clean mitered or beveled edges...it's a very strong and more or less invisible joint.
I use "Weld*on", it's for polycarbonate and some other plastics. It's clear, water-thin, sets up in less than 60 seconds, and very strong.What kind of glue would you use?
I have 2 of these Latheguard shields . One on each lathe that are leaving . I'll part them off if anyone is in need . I believe a 15" and a 12" . 13060 and 13061 .I want something like Mark @mksj posted.