Bill,
YOU SUCK!!!!! You do stumble up on some nice stuff. I sure wish we had the kind of stuff in my area that you seem to consistently find in yours. Are you planning a rebuild from the ground up or just a minor tweak and adjust until later? You always make such cool stuff I look for your posts to see what new and exotic thing you are making now. So keep up the great work and send a little of that good fortune my way when you have a bit to spare. You are one lucky old dog.....
Bob
This one is a runner Bob. Only a wash down needs to be done. It was rebuilt last year. It has never cut anything but Brass. The price was right, I bartered for this one. He needed some parts (50 pieces) made and I needed a mill. Done deal.
that is really nice bill i have as friend that has the same machine. it is so well built. just look at all the gib screws they were not playing around when they built them.
steve
Nice looking machine, Bill. Ready to run is hard to beat. And if I recall correctly, you didn't have a mill in your shop prior to this. So that makes it so much sweeter. Congratulations!
Congratulations on obtaining that Clausing! You will like it. I was always used to working with Bridgeports and clones (somebody else's) and I was interested in an 8520 for myself but was always worried that it would be too small. I finally found one a year ago and got it home. Went through it and found that it will need to have a new gear made for the fine feed. It had a few other small problems but they were easily remedied. So far it has been a great machine for my purposes and size has not been a problem. Good luck and enjoy yours!
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.