[4]

Clausing Kondia FV-1

[3]
[10] Like what you see?
Click here to donate to this forum and upgrade your account!

shell70634

H-M Supporter - Gold Member
H-M Supporter - Gold Member ($25)
Joined
Mar 7, 2018
Messages
28
I'm making room in the shop for a Clausing Kondia FV-1. I have an area about 6 ft by 8 ft near power. Is that enough? I have a larger area but would need to run electrical and I'm trying to avoid that. I've looked at it but wasn't able to get close enough with a tape measure.
 

Latinrascalrg1

Active Member
Registered
Joined
Dec 9, 2016
Messages
399
6'x8' for a vertical mill is way more then enough room so long as your head space is adequate and your project material is smaller then those dimensions.....at least I would think so!
 

Shootymacshootface

Active Member
Registered
Joined
Mar 17, 2018
Messages
319
I have the same mill. Obviously you want room for the table movement, but don't forget to leave room in back of the machine to move the head back.
 

shell70634

H-M Supporter - Gold Member
H-M Supporter - Gold Member ($25)
Joined
Mar 7, 2018
Messages
28
Picked it up today. Spent the last 3 hours cleaning. Cleaned so hard I knocked the paint off. At least it came with lunch in the sump.

It's serial number R-490, any idea when it was made? Are parts available?
293000

293001

293002
 
Last edited by a moderator:
[6]
[5] [7]
Top