CNC electrical cabinet size?

[slow-poke]

I picked up qty 2 Vevor new in box for $50 for the pair on Kijiji. Quality is good. I made a window and gifted the spare to a friend.

WIP, 2 of 4 drives so far 750W. I'm using ac servo's so no power supply, just the drive. I'm using a Mesa board for control.

 

[7milesup]

@slow-poke How did you cut the opening for the window? I like it.

 

[slow-poke]

@slow-poke How did you cut the opening for the window? I like it.

I cut it on the mill one edge at a time, then used epoxy to attach the plexiglass window.

 

[Kev-in]

That window looks amazing, great work!

 

[rronald]

I like the CHK line of Hammond boxes. The 12"x12"x6" is a nice steel box that Wistex will ship to you, FEDEX, for $31 and change..shipping included. They are very fast. That's large enough for a couple of power supplies and it's where I did my ELS electronics for the lathe. No gland plate, but I just bolt thru the back and then mount the box a little proud of the surface I'm mounting to with a 3d printed spacer on each corner.

They make these up to 36x24x8. $182 for that one.

Sometimes you can find nice boxes on ebay.