- Joined
- Feb 2, 2013
- Messages
- 3,901
My apologies, you can just connect with the existing green wire terminal
Your panel appears to be slightly different
Your panel appears to be slightly different
Ok thanks , I appreciate your helpThe R & S terminals designations are still as described earlier
One more question, I’ve noticed from looking at my contactors that they have what appears to be jumper wires on them, haven’t seen this on any other pictures that I’ve viewed. Any idea what’s going on there ?Ok thanks , I appreciate your help
From others that I’ve seen these appear to be extra wires that jump from one Contactor to another..I guess it means it'll either work fine or you'll need to completely rewire it. LOL
My guess is the contactors have been replaced and whoever did it didn't care about tidying up the wires
The lack of reversing contactors leaves the necessity to use jumper wires for directional controlFrom others that I’ve seen these appear to be extra wires that jump from one Contactor to another..
I thought one of those contactors was the reversing contactor?The lack of reversing contactors leaves the necessity to use jumper wires for directional control
The jumper wires say encore wire on them so I’m pretty certain someone added them, just don’t understand why ?I thought one of those contactors was the reversing contactor?
Reversing contactors are generally 2 contactors that operate as an assembly interlocked to prevent the use of both contactors at the same time.I thought one of those contactors was the reversing contactor?