Hi all
I have a couple of tool holders that take TNMG 321 inserts. I know these are older inserts that have been surpassed by modern designs, but I'd still like to use them.
I tried to convert the ANSI insert code (321) to ISO, to see if there were additional options available. I came up with TNMG 1603, but when I search for that it only brings up carbide shims for under a 1604 insert. I think the 1604 insert is thicker than a 321 insert (more like a 331), so I don't think it will work in my milling holder (a shars "little hogger" endmill).
Have I done the conversion wrong, or is there something else I'm missing?
Thanks
Lee
I have a couple of tool holders that take TNMG 321 inserts. I know these are older inserts that have been surpassed by modern designs, but I'd still like to use them.
I tried to convert the ANSI insert code (321) to ISO, to see if there were additional options available. I came up with TNMG 1603, but when I search for that it only brings up carbide shims for under a 1604 insert. I think the 1604 insert is thicker than a 321 insert (more like a 331), so I don't think it will work in my milling holder (a shars "little hogger" endmill).
Have I done the conversion wrong, or is there something else I'm missing?
Thanks
Lee