- Joined
- Nov 20, 2014
- Messages
- 96
This motor came with my South Bend lathe. It was wired for 220v 1ph. The po stated that he went to turn it on one day and the magic smoke came forth and it just hummed. I took it apart and found the wire labled 2a not connected to anything. I'm thinking it came loose from the reset button. I need to put some shrink tubing on all the leads as the insulation is brittle. I also need to know how to rewire it. I tested the leads and found the pairs. This was run thru a drum switch so it had reverse. I don't have the remains of the original wiring, but I can get pics of the drum switch.