- Joined
- Mar 26, 2018
- Messages
- 8,453
Hello all,
One of the challenges of a small space is it's small![Smile :) :)](data:image/gif;base64,R0lGODlhAQABAIAAAAAAAP///yH5BAEAAAAALAAAAAABAAEAAAIBRAA7)
Seriously, being efficient and methodical when deciding a place for everything and everything in it's place.
I'm making good progress. I am building another welding cart that will hold my tanks, the Miller AC/DC 220-mig, tig, stick and the plasma cutter. I am also planning on adding a tig cooler to it some day.
I am thinking I can make some sort of pull out shelf in the pic with the disconnect. I plan on moving the box up and out of the way, put two shelves with a pull out. This way I'll have my 8" bench grinder with the green wheel, 1 gray wheel, a wire wheel and a buffer all in this one spot. I just bought the 3/4 hp Grainger. It has a Chinese wheel but it's well balanced. I got lucky. That will be changed out with a Norton first thing. The Dewalt 8" will hold a gray wheel and the wire wheel
I was hoping to have all my grinding equipment in one spot but that may not work out.
I pick up the shaper, the Baldor tool room grinder and a surface plate next weekend. Need to find a spot for the shaper.
The Brown and Sharpe 618 Micromaster will be here in a couple weeks hopefully.
By Summers end I should have my new shop to my liking.![IMG_0096.jpg IMG_0096.jpg](https://www.hobby-machinist.com/data/attachments/254/254182-3e518182d0f34d9af9056a17dab47b12.jpg)
![IMG_0097.jpg IMG_0097.jpg](https://www.hobby-machinist.com/data/attachments/254/254183-9048a626bf21bfb903eaa5d762cbc823.jpg)
![IMG_0098.jpg IMG_0098.jpg](https://www.hobby-machinist.com/data/attachments/254/254184-300ff53a64717abd183a2cbefd464131.jpg)
![IMG_0100.jpg IMG_0100.jpg](https://www.hobby-machinist.com/data/attachments/254/254185-89f256214b932621f1e4910f44a7784e.jpg)
![IMG_2954.JPG IMG_2954.JPG](https://www.hobby-machinist.com/data/attachments/254/254186-37c8a0dfd5bd286ff3d297de5e1d1cc0.jpg)
![IMG_2956.JPG IMG_2956.JPG](https://www.hobby-machinist.com/data/attachments/254/254187-4523f859406627b67492e0fc914a0637.jpg)
One of the challenges of a small space is it's small
Seriously, being efficient and methodical when deciding a place for everything and everything in it's place.
I'm making good progress. I am building another welding cart that will hold my tanks, the Miller AC/DC 220-mig, tig, stick and the plasma cutter. I am also planning on adding a tig cooler to it some day.
I am thinking I can make some sort of pull out shelf in the pic with the disconnect. I plan on moving the box up and out of the way, put two shelves with a pull out. This way I'll have my 8" bench grinder with the green wheel, 1 gray wheel, a wire wheel and a buffer all in this one spot. I just bought the 3/4 hp Grainger. It has a Chinese wheel but it's well balanced. I got lucky. That will be changed out with a Norton first thing. The Dewalt 8" will hold a gray wheel and the wire wheel
I was hoping to have all my grinding equipment in one spot but that may not work out.
I pick up the shaper, the Baldor tool room grinder and a surface plate next weekend. Need to find a spot for the shaper.
The Brown and Sharpe 618 Micromaster will be here in a couple weeks hopefully.
By Summers end I should have my new shop to my liking.
![IMG_0096.jpg IMG_0096.jpg](https://www.hobby-machinist.com/data/attachments/254/254182-3e518182d0f34d9af9056a17dab47b12.jpg)
![IMG_0097.jpg IMG_0097.jpg](https://www.hobby-machinist.com/data/attachments/254/254183-9048a626bf21bfb903eaa5d762cbc823.jpg)
![IMG_0098.jpg IMG_0098.jpg](https://www.hobby-machinist.com/data/attachments/254/254184-300ff53a64717abd183a2cbefd464131.jpg)
![IMG_0100.jpg IMG_0100.jpg](https://www.hobby-machinist.com/data/attachments/254/254185-89f256214b932621f1e4910f44a7784e.jpg)
![IMG_2954.JPG IMG_2954.JPG](https://www.hobby-machinist.com/data/attachments/254/254186-37c8a0dfd5bd286ff3d297de5e1d1cc0.jpg)
![IMG_2956.JPG IMG_2956.JPG](https://www.hobby-machinist.com/data/attachments/254/254187-4523f859406627b67492e0fc914a0637.jpg)