- Joined
- Nov 8, 2012
- Messages
- 783
Got my new motor from Grizzly, here's the wiring diagram.
I wired and connected the motor as shown and it works like it's supposed to.
The motor has a 4 place terminal strip in the connection box. I connected the Yellow, Black, & Blue5 wires together on one terminal. I then connected the other 3 wires (Red, White, & Blue6) to their own strip connection.
Now for the drum switch. Here's a picture showing the way it operates (the fwd & rev are switched on mine).
I've tried every connection combination I could think of and then some, but cannot figure one out that switches the Blue6 wire from one lead to the other. I had success once, but then I didn't have connection from power to one of the other two leads (White/Red).
I was almost to the point of disassembling the switch to see if I could change the operation to this style (adding a picture of the switch itself.
Can anyone tell me if there's a way to wire this switch for 220v single phase or if it's possible to dismantle the swich and rearrange the connectors to operate like the R22 switch ???
I wired and connected the motor as shown and it works like it's supposed to.
The motor has a 4 place terminal strip in the connection box. I connected the Yellow, Black, & Blue5 wires together on one terminal. I then connected the other 3 wires (Red, White, & Blue6) to their own strip connection.
Now for the drum switch. Here's a picture showing the way it operates (the fwd & rev are switched on mine).
I've tried every connection combination I could think of and then some, but cannot figure one out that switches the Blue6 wire from one lead to the other. I had success once, but then I didn't have connection from power to one of the other two leads (White/Red).
I was almost to the point of disassembling the switch to see if I could change the operation to this style (adding a picture of the switch itself.
Can anyone tell me if there's a way to wire this switch for 220v single phase or if it's possible to dismantle the swich and rearrange the connectors to operate like the R22 switch ???