- Joined
- Oct 5, 2010
- Messages
- 1,050
I removedthe offending contactor from the lathe. Generally it looks good. I don't see any evidence of damage. The contacts weren't bad ,but I filed and cleaned them anyway. Rather than to randomly apply 120 volts and cause damage, I sure didn't see a A1 or A2. I thought I'd use some pictures. I see terminals R,S, T, 3a, bU, V, W, 4 and for those terminals not marked I added 7, U2, V2 and jumper (which connects the 2 conjoined units).
So where do I connect the 120v to see if the magnet functions and thus work? I'd have no idea of where I'd find a replacement if it doesn't work.
Thanks again
Randy
View attachment 124685 View attachment 124686 View attachment 124687
So where do I connect the 120v to see if the magnet functions and thus work? I'd have no idea of where I'd find a replacement if it doesn't work.
Thanks again
Randy
View attachment 124685 View attachment 124686 View attachment 124687