I recently picked up an enco 110-2034 12X36" lathe. It's in otherwise good shape and runs good when it's directly wired to the motor, as it was when I got it.
Original motor has been replaced with a Marathon 1.5 hp 110/220v motor. The lathe is a 1995 vintage. I have a couple questions. I want to wire it back to 220v. The transformer, I'm assuming needs to be on 220 and 0 and 24 and 0 on the other side.
I am also wondering about wiring the motor. I understand the 220v wiring for the motor, but I have Z1, Z2, V1 and V2 going to the motor. Not sure exactly how to wire those guys together. Any help or guidance would be appreciated.
View attachment 264682View attachment 264683
View attachment 264684
View attachment 264685