- Joined
- Nov 2, 2012
- Messages
- 415
Here's a first swing at it. I think you'll need to purchase the tubes you want and then I'll adjust accordingly so the miter templates work out. This one is 25.4 top, and 28.6 seat and down tubes. Most traditional steel bikes will use a 1" steerer, but you could do 1.125" if you really wanted. I usually leave my road bikes at 1", but either works.
Measurements (I can add a zillion more):
An idea of how she'd fit:
Something to start with, anyway.
-Ryan
Measurements (I can add a zillion more):
An idea of how she'd fit:
Something to start with, anyway.
-Ryan