- Joined
- Mar 26, 2018
- Messages
- 8,411
I don’t like how my bench grinder vibrates everything off the bench.
This is cheap and it works very well.
5/8” OD x1/4” ID shielded bearings. I chose double shielded vs sealed due to the friction of the seals.
I am using “D” drill bit, .246”.The 246 blocks have that patina because they went through the fire.
This is cheap and it works very well.
5/8” OD x1/4” ID shielded bearings. I chose double shielded vs sealed due to the friction of the seals.
I am using “D” drill bit, .246”.The 246 blocks have that patina because they went through the fire.
Last edited: