- Joined
- Jun 21, 2014
- Messages
- 40
The first thing I thought I would do is the tail-stock, it was the easiest part to get off. I tore it all down and cleaned it up, everything is in nice shape except where the tail-stock rides on the ways, there is a groove about .010 deep (see picture). I will probably have to shim it up. I don't think this is the original tail-stock because where the tail-stock rides on the ways I can still see the scraping. I also can't quite make out the tail-stock number on the serial number card.
![IMG_1317.JPG IMG_1317.JPG](https://www.hobby-machinist.com/data/attachments/45/45592-3357545ea1c429f0d230c838df9ddf8b.jpg)
Before
![IMG_1320.JPG IMG_1320.JPG](https://www.hobby-machinist.com/data/attachments/45/45593-ffbb5834fb68defdd2567704ebf86a2f.jpg)
![IMG_1324.JPG IMG_1324.JPG](https://www.hobby-machinist.com/data/attachments/45/45594-841a3d7885c591c3318dcb39bd92b9ab.jpg)
After, as if you couldn't tell.
![IMG_1325.JPG IMG_1325.JPG](https://www.hobby-machinist.com/data/attachments/45/45595-135f42c8c8ea569bf7e4b199732c1f76.jpg)
I also cleaned up a few small parts.
Almost forgot, does anyone know what the hole is for near the quill across from the locking lever??
![IMG_1325.JPG IMG_1325.JPG](https://www.hobby-machinist.com/data/attachments/45/45595-135f42c8c8ea569bf7e4b199732c1f76.jpg)
![IMG_1317.JPG IMG_1317.JPG](https://www.hobby-machinist.com/data/attachments/45/45592-3357545ea1c429f0d230c838df9ddf8b.jpg)
Before
![IMG_1320.JPG IMG_1320.JPG](https://www.hobby-machinist.com/data/attachments/45/45593-ffbb5834fb68defdd2567704ebf86a2f.jpg)
![IMG_1324.JPG IMG_1324.JPG](https://www.hobby-machinist.com/data/attachments/45/45594-841a3d7885c591c3318dcb39bd92b9ab.jpg)
After, as if you couldn't tell.
![IMG_1325.JPG IMG_1325.JPG](https://www.hobby-machinist.com/data/attachments/45/45595-135f42c8c8ea569bf7e4b199732c1f76.jpg)
I also cleaned up a few small parts.
Almost forgot, does anyone know what the hole is for near the quill across from the locking lever??
![IMG_1317.JPG IMG_1317.JPG](https://www.hobby-machinist.com/data/attachments/45/45592-3357545ea1c429f0d230c838df9ddf8b.jpg)
![IMG_1320.JPG IMG_1320.JPG](https://www.hobby-machinist.com/data/attachments/45/45593-ffbb5834fb68defdd2567704ebf86a2f.jpg)
![IMG_1324.JPG IMG_1324.JPG](https://www.hobby-machinist.com/data/attachments/45/45594-841a3d7885c591c3318dcb39bd92b9ab.jpg)
![IMG_1325.JPG IMG_1325.JPG](https://www.hobby-machinist.com/data/attachments/45/45595-135f42c8c8ea569bf7e4b199732c1f76.jpg)
Last edited: