- Joined
- Jan 31, 2016
- Messages
- 12,735
Not at this point ! But I am clearing out .Is there anything that you do NOT have downstairs?
Not at this point ! But I am clearing out .Is there anything that you do NOT have downstairs?
You on the Prazi board? Io:groups?I don't have these in my possession. I spied them on craigslist, seller didn't know. A Hardinge pdf showed up first in a goolog search. In any event they don't seem to be for an 3" AMA chuck. What I need.
AND does down stairs include under ground storage...lolIs there anything that you do NOT have downstairs?
Yes. I've asked a couple times. No hits.You on the Prazi board? Io:groups?
Yes. I've asked a couple times. No hits.
Someone even posted photos of an MD65 wit duh AMA 3 jaw. It made me sad.
I think you are right.Commonly orphaned when the lathe is sold with the chuck but the second set of jaws is somewhere else. Usually sold by a family member of the deceased owner. Not so common to get the chuck key.
My guess is, spare or outer jaws to a scroll chuck and the chuck key....I guess 1 (of the 4) could be missing. As a possibility.
I think you are right.
I am collecting waiting for the right chuck to come along for what it's worth, several are marked Cushman.
In the second picture, there are two additional jaws the larger one is out of a
7 .5 inch cushman 3 jaw.
The smaller set are from a Rohm chuck.
I would say dimensions are key here.View attachment 470252View attachment 470254
Really all you need is a thread. There are too many sections imho here as it is. The Prazi list foesn't get a ton of posts anyway.