Hi Folks, I just picked up a used lathe mill combo unit. The name tag says Force International and the previous owner told me that it was purchased from Busy Bee. It appears to be basically the same as the current Craftex B2229 combo unit. It is visually the same, except mine is blue and white instead of green and yellow. Approximately 10 years old. I was told that it was not used very much, but that is all I really know about its history. It has been neglected and in storage for the past 2-3 years or more. Anyhow...I'm wondering what all I should do to inspect and tune this thing up? I've gone over it and found all the lubrication points but it still needs an oil change in the gear box. I would love any suggestions as far as what oil and lubricants to use, as well as suggestions on what TO do starting out with it. I don't have a manual for the machine, so I only have the downloaded Craftex B2229 manual...and it doesn't seem to be overly detailed. Any suggestions on what to do to get this old girl all tuned up?? Thank you in advance for your help!