- Joined
- Apr 16, 2019
- Messages
- 745
In the collets of the Clausing 8520 mill I picked up last week were 3 Albrecht keyless drill chucks , cleaned up 2 but the smallest is rusted fast I believe in the open position it's a 0-1/8" At least from what I could read . I'm soaking it in PBlaster but I don't think that's going to do it . Also the collects that came with it have some surface rust Tried using a red Scotch Brite pads and PBlaster on one , came out so-so , any recommendations for those ?