I am doing some 230VAC signal wiring on my mill, but I can't find any suitable wire. Since these are only carrying signals, the wire does not need to carry any significant current, and due to both size and cost restrictions it should be reasonably small. It needs to have six conductors. does not need shielding, and should probably be between 20 and 24 AWG. It can be either stranded or solid. Since the signals are going to be 230VAC, 60Hz, the cable need to be rated for 600VDC. I have been looking around, but all I can find is either high current (16AWG or more) or only rated for 300VDC. I need about 10 feet total length. I could possibly use individual multi-colored wires, but a single six-core cable is much preferred. PVC insulation is fine.