Knurling Wheel

[JPMacG]

Me too! I'm building a Tom's Techniques knurler. It is designed for 1/4" wide, 5/8" diameter, 1/4" bore knurling wheels.

 

[C-Bag]

Me too! I'm building a Tom's Techniques knurler. It is designed for 1/4" wide, 5/8" diameter, 1/4" bore knurling wheels.

that's the same knurler I made and am always looking for coarse diamond pattern wheels that same size.

 

[Larry$]

If you need a few wheels

Boy did you open the flood gates!

 

[C-Bag]

Boy did you open the flood gates!

just trying to help a brother out to get rid of his clutter

 

[ttabbal]

Here's just a few of them . I'm just getting started organizing this stuff but these happened to be right in front of me when you posted . Whats left of my knurlers .

any 3/4 X 3/8 X 1/4 ? I only have one quality set, should at least have one backup!

 

[ddickey]

That's the one I was using when I destroyed my wheels.

 

[mmcmdl]

That's the one I was using when I destroyed my wheels.

Sent you a pm .

 

[ddickey]

Have to head out ot the shop and check. Will get back to you.

 

[ttabbal]

That's the one I was using when I destroyed my wheels.

So, how did you do that to a wheel anyway?

 

[ddickey]

Got everything centered wheels just barely started to rotate on the work piece. Moved the knurler off of the workpice and turned both wheels in a half turn. The screw pitch was .055" so half of that x2 brings us back to a depth of .055" way to much and just destroyed the wheels. Total operator error.
These were the wheels.

GKRV225

GKRV225

accu-trak.com