- Joined
- Dec 26, 2017
- Messages
- 60
Round 2 for the spindle. I left it long because I'm not sure what to do about capturing the pulley's. My smallest drill bit is .040". My first attempt at drilling the spindle failed miserably. The little MicroLux drill I have is not a bad drill. The vise sucks. It's intended for model making not metal working. I need to come up with an easier solution for keeping the pulleys on the shaft. I want them to spin freely so Super Glue is out.
The original pulley's and aluminum spindle are in the baggie, almost finished pulleys and spindle are below the bag. The old spindle is to the right.
The original pulley's and aluminum spindle are in the baggie, almost finished pulleys and spindle are below the bag. The old spindle is to the right.