- Joined
- Jun 15, 2015
- Messages
- 35
Grizzly will sell you the plate you need for about $7.00 I think. Then you just drill and tap it to match the QCTP. I did it that way on my 752 after somebody suggested it. Doing it this way you still have the original plate if you wanted to use the turret tool holder in the future.
It was an M14 x 1.5mm tap that matched the bolt on the QCTP. Mine is a Bostar from somebody on EBay.
It was an M14 x 1.5mm tap that matched the bolt on the QCTP. Mine is a Bostar from somebody on EBay.