- Joined
- Aug 5, 2018
- Messages
- 261
Been thinking about doing some sort of coolant system for my mini mill for some time and if it works out, possibly adapting it to my mini lathe. However, research has shown me that although there are many methods, flooding is the best.
This project will require a tremendous amount of work redesigning my work area, not to mention building the system itself and the containment enclosure.
I've tried sprays and oils and other lubricants and the smoke generated is not something I want to deal with in my small shop.
If there is something I can use that doesn't smoke up my shop and that'll spare me the work, time and expense of this project, PLEASE let me know.
Thanks in advance,
Mike.
This project will require a tremendous amount of work redesigning my work area, not to mention building the system itself and the containment enclosure.
I've tried sprays and oils and other lubricants and the smoke generated is not something I want to deal with in my small shop.
If there is something I can use that doesn't smoke up my shop and that'll spare me the work, time and expense of this project, PLEASE let me know.
Thanks in advance,
Mike.