- Joined
- Sep 2, 2013
- Messages
- 54
While I was recovering from shoulder surgery earlier this year, I came across Mr. Pete 222 and TinkerJohn on YouTube. I found their videos on building model steam engines very interesting and decided to give it try. I chose the PM Research #3 horizontal engine bronze and iron casting kit. I documented the machining process on video and posted it on YouTube. Most everything involved in the machining I learned from YouTube. I admit I made a few minor mistakes that didn't affect the outcome of the engine, but I learned quite a bit and I am looking forward to building another engine soon. If anyone is interested, the videos can be found here, https://www.youtube.com/playlist?list=PL3EdvTvwbAmR7Pe-suLnDOCGaVUdVwy0g
Last edited: