- Joined
- Nov 16, 2014
- Messages
- 56
I made a little progress on the x-axis mounting blocks.
I attached a pdf of the drawing.
BTW, I'm liking Fusion 360 so far. as a CAD tool
I clamped the blocks together while milling the ends to be sure they were the same length.
Now they're ready to cut the slot and drill the holes.
I attached a pdf of the drawing.
BTW, I'm liking Fusion 360 so far. as a CAD tool
I clamped the blocks together while milling the ends to be sure they were the same length.
Now they're ready to cut the slot and drill the holes.