- Joined
- Jan 30, 2021
- Messages
- 5
Know very little on machining/pressing stuff so was hoping to get some info on this forum.
Have a new transmission shaft on a well-made, discontinued Honda lawn mower that am trying to rebuild. Have pressed in bearings on it using a vise, but this seems to be a different animal to get in. The shaft is steel and the 6x15mm rod that is inserted in the shaft takes the engine power through the transmission to turn the back wheels. Is there any tool/tools that may facilitate this job? or what type machine shop with what tools should be able to handle this job and at what cost range? TIA and can give more info if would help.
Have a new transmission shaft on a well-made, discontinued Honda lawn mower that am trying to rebuild. Have pressed in bearings on it using a vise, but this seems to be a different animal to get in. The shaft is steel and the 6x15mm rod that is inserted in the shaft takes the engine power through the transmission to turn the back wheels. Is there any tool/tools that may facilitate this job? or what type machine shop with what tools should be able to handle this job and at what cost range? TIA and can give more info if would help.
Attachments
Last edited: