- Joined
- Sep 29, 2017
- Messages
- 2,253
Hi guys
I have a question about 2 reamers I got in a batch of tools I bought, but I haven't worked alot with reamers before. I am familiar with H7 reamers,but these I need help with.
Can someone explain what the 11/11 and 22/11 means?
The reamer also tapers off quite a bit to the front. Another thing is that there is a 25 stamped on the reamer,wich usually means the size wich in this case would be 25mm. But thing is it doesn't measure 25mm. I don't have them with me right now,but I think it measured about 23mm at the biggest point,but I am not sure,can check tomorrow.
Can someone shine some light on this for me please.
Thanks guys
Michael
I have a question about 2 reamers I got in a batch of tools I bought, but I haven't worked alot with reamers before. I am familiar with H7 reamers,but these I need help with.
Can someone explain what the 11/11 and 22/11 means?
The reamer also tapers off quite a bit to the front. Another thing is that there is a 25 stamped on the reamer,wich usually means the size wich in this case would be 25mm. But thing is it doesn't measure 25mm. I don't have them with me right now,but I think it measured about 23mm at the biggest point,but I am not sure,can check tomorrow.
Can someone shine some light on this for me please.
Thanks guys
Michael