- Joined
- Oct 28, 2018
- Messages
- 124
Today while trying to remove a drill chuck from the tail stock the quill became disconnected from the hand wheel. Upon disassembly I discovered the brass screw dislodged from the quill. There are 2 opposed 1/8" diameter holes near the end of the quill, but no pins or mating holes in the screw. Also found a mangled square sided rubber washer that fell out upon the disassembly. Questions: Where can I find a cross section drawing of the tailstock assembly andparts list. Are there supposed to be pins to lock the brass screw in place, and what is and where does the rubber washer go.