I am trying to mill some slots in the aluminum to shape it.
I had a suggestion to run it at 4000 RPM and a feed rate of 8 inches/min at full depth of the part. I do not have the way to add coolant so you can imagine what happened.
I have no ides on how to do this so I need help with the speeds and feeds etc.
I have attached a picture of my set up and the results of my first try.
I am feeding left to right so it is climb milling at full part depth of 0.04.
I had a suggestion to run it at 4000 RPM and a feed rate of 8 inches/min at full depth of the part. I do not have the way to add coolant so you can imagine what happened.
I have no ides on how to do this so I need help with the speeds and feeds etc.
I have attached a picture of my set up and the results of my first try.
I am feeding left to right so it is climb milling at full part depth of 0.04.