Almost ready for paint is my newest acquisition - a Van Norman Slotter. Best I can tell there are 2 sizes that were offered. The difference being in whether it was made to receive 1/2" or 5/8" slotting tools. Having said that, a prospective buyer still needs to be aware of the mount portion & whether it will fit your mill or not. My slotter is the larger size - but with a mount for a no22 (same as my hi speed subhead). It came with an adaptor that fits it to the 24 & up sizes & a drive that fits a 1 - 1/4 tool holder. I found a 1 - 1/4 tool holder for a good price. Here is the drive & holder joined.
Well, the shoulder is too thick for the adaptor. Here is the adaptor all cleaned up.
Mill side.
Attachment side.
I'm just about ready for paint. Since I'm on night shift in a few hours, I'll leave these pics for now.
Well, the shoulder is too thick for the adaptor. Here is the adaptor all cleaned up.
Mill side.
Attachment side.
I'm just about ready for paint. Since I'm on night shift in a few hours, I'll leave these pics for now.