South bend accessories

[cgcwmec627]

Here the things I bought

 

[sdelivery]

Nice, what size Southbend?

 

[cgcwmec627]

They are from a 9inch machine,the lathe had moved on to new owners ,some time ago.
These were left behind.

 

[Nutfarmer]

Remove the rust and sell what you can’t use. There is a good market for South Bend lathe accessories.

 

[cgcwmec627]

Remove the rust and sell what you can’t use. There is a good market for South Bend lathe accessories.

I've been busy cleaning up the parts I brought home.
Once done I'll post up an after picture.

 

[twooldvolvos]

Here the things I bought

Nice find. The telescoping steady rests are in high demand. I bought one for my 10K about a year ago for about $400. Also, the threading attachment should go for at least $100.

 

[RandyM]

Must be still working on cleaning them.

 

[twooldvolvos]

They are from a 9inch machine,the lathe had moved on to new owners ,some time ago.
These were left behind.

Some of the parts (not the steady rest) will also fit a 10K.

 

[cgcwmec627]

Must be still working on cleaning them.

Yes,I am.
The collet closer is a challenge to free up.
I'll get it

 

[cgcwmec627]

It's been awhile but I cleaned up the SB parts I brought home.
Toughest part was the collet hand wheel and tube,someone had the threaded end in a vise and pinched it.If I get it back I to true that would be good,otherwise"oh well",I hate giving up on old stuff that isn't made anymore so at least it's worth a try.
The Rivett steady rest will get an adapter plate to fit my South Bend 10L