- Joined
- Apr 14, 2014
- Messages
- 3,168
I am looking to better organize my inventory of taps. I currently have in the neighborhood of 500 or more tape ranging in size from 0-80 to 2"-8. They currently occupy several drawers in a roll around printers cabinet. I would like to move and better organize them into something like the Huot 13500 and 13550 cabinets. They seem interesting, but are somewhat rudimentary in that they don't have separate dividers for plug, taper, and bottoming versions of each tap. In addition their capacity seems somewhat limited for each size. I am looking to store approximately a dozen or so of each of the less common taps, and 36 to 40 of the more common fractional taps. The larger volume taps include 1/4-20, 5/16-18, 3/8-16, and 1/2-13. In addition I have a fairly large number of left hand taps, and Special Thread Insert (STI) taps
I am not averse to spending the money necessary for a quality storage and dispensing system, but would like to keep it within reason.
I am not averse to spending the money necessary for a quality storage and dispensing system, but would like to keep it within reason.