Old Iron Active User Registered Joined Sep 29, 2010 Messages 1,558 Aug 19, 2012 #1 I made these out of 6160 3/4 X 11" I made them long enough so the houlrd wlth the cutter was facing each other. Frist picture is milling the end. Them miling out the center. Cutting the dove tails This is how the tool holders will fit.
I made these out of 6160 3/4 X 11" I made them long enough so the houlrd wlth the cutter was facing each other. Frist picture is milling the end. Them miling out the center. Cutting the dove tails This is how the tool holders will fit.
Old Iron Active User Registered Joined Sep 29, 2010 Messages 1,558 Aug 19, 2012 #2 Drilled ant tap the bottom to put in a screw to stop the cutters from falling off. Done and painted. I got the idea from ebay the is a guy selling them for AXA and BXA but not for CXA and his are shorted so the cutters point out. Paul
Drilled ant tap the bottom to put in a screw to stop the cutters from falling off. Done and painted. I got the idea from ebay the is a guy selling them for AXA and BXA but not for CXA and his are shorted so the cutters point out. Paul
Kennyd Active User Registered Joined May 1, 2011 Messages 484 Aug 19, 2012 #3 Nice job, I keep wanting to make them as well but I will probably use MDF to keep costs down.
Old Iron Active User Registered Joined Sep 29, 2010 Messages 1,558 Aug 19, 2012 #4 Kennyd said: Nice job, I keep wanting to make them as well but I will probably use MDF to keep costs down. Click to expand... I got the Aluminum of ebay and it was cheap but if you already have the MDF that will work also. Paul
Kennyd said: Nice job, I keep wanting to make them as well but I will probably use MDF to keep costs down. Click to expand... I got the Aluminum of ebay and it was cheap but if you already have the MDF that will work also. Paul