- Joined
- Dec 31, 2010
- Messages
- 937
My mill/drill sits on the factory made stand that sits on the old house wood flooring. The leveling screws 1/2" X 13 TPI fit in 4" X 4" X 1/4: plates with recessed holes so the machine won't wander. On rare occasions I get a harmonic motion when milling. When I moved the old house I put a concrete slab under the wood floor with treated 2" X 4" to support the the floor joists in the shop area. The rest of the building is going to be a garage.
Have a good day
Ray
Have a good day
Ray