Wiring Atlas 10” QC-54 for 115 volt

N

nfathi

Registered
Registered
Joined
Jan 9, 2021
Messages
3
Hi everyone, restoring my Atlas 10” QC-54 for 115 volt and need help :) it is already wired for 220 and unfortunately No 1 wire is not tagged! Not too savvy with wiring motors! I have attached the wiring chart from the back of the plate as well as a picture of how it is wired as of today for 220V. Any help is appreciated!
 

Attachments

  • F82837D7-3F2D-48D1-984C-B1FC6EECEE7E.jpeg
    F82837D7-3F2D-48D1-984C-B1FC6EECEE7E.jpeg
    1.7 MB · Views: 31
  • B1B86A9E-8A61-4BE3-9981-5BE2E92EDDD8.jpeg
    B1B86A9E-8A61-4BE3-9981-5BE2E92EDDD8.jpeg
    1.6 MB · Views: 21
  • D54C8318-36CF-463B-9B3F-17C30F6C2ECA.jpeg
    D54C8318-36CF-463B-9B3F-17C30F6C2ECA.jpeg
    2.1 MB · Views: 20
Based upon your photo. Line 1 goes to black in both cases. So that one is clear.
 
Thanks and I kinda recognized that but not sure which wire is this one and why is it connected to red? Is that 2 as well?
 

Attachments

  • 3D69E84E-EE97-4435-AEC6-7314E3E6B930.jpeg
    3D69E84E-EE97-4435-AEC6-7314E3E6B930.jpeg
    97.7 KB · Views: 17
Last edited:
I also labeled every wire in this picture. If anyone can tell me exactly which wires need to be connected to each other for 110/115 volt by using my labeling scheme, I’d really appreciate it!
 

Attachments

  • CB7447F1-79C7-43D4-965D-A8FCD58A2567.jpeg
    CB7447F1-79C7-43D4-965D-A8FCD58A2567.jpeg
    847.5 KB · Views: 8
You must log in or register to reply here.
Back
Top