During the last week or so, I built myself a 3' long and about 2 1/4' wide welding table. I used 1/2" x 8" flat bar for the the top, drilled 4 x 9/16" holes in each and left a 2" gap between each. Both the holes and gaps are to clamp workpieces onto the table and when two or more workpieces are clamped to the table, I know they're all lying equally flat. Three of the feet are welded onto 3/4" bolts and can be screwed in or out to level the table on uneven floors.
I used it yesterday for the first time and it works really well.
![Table.JPG Table.JPG](https://www.hobby-machinist.com/data/attachments/57/57923-7b45aa40cc9ab08535a37e7ab0cdbfc8.jpg)
I used it yesterday for the first time and it works really well.
![Table.JPG Table.JPG](https://www.hobby-machinist.com/data/attachments/57/57923-7b45aa40cc9ab08535a37e7ab0cdbfc8.jpg)