- Joined
- Aug 29, 2019
- Messages
- 664
I have an old Marathon single phase dual shaft and dual voltage motor, currently it is set up for 110 volts. My issue is that ALL the leads to the coils are beyond reusing. Insulation crumbled and the only thing I know to do is replace all of them. I would like to meg the windings before going to the trouble to repair it. The motor was running when I took it apart. I have my own megger and have used it on 3 phase motors. Also, during the replacement of the leads, I would like any information on what wire to use and a possible source for it and the hi temp insulation sleeves. Thanks in advance.