This has been a project I've been procrastinating on for awhile, working on it pretty infrequently, but finally have done it. I made a plow attachment for one of my mowers a couple years ago, and it's worked well. But, I forgot to use the skid feet for the plow, and it just floats along the ground under it's own weight, and whatever weight what it pushes adds to it. After 2 winter seasons, the wear bar has, well, gone past being worn out. The plow itself has been worn down to the bolt holes for the wear bar.
So, I bought a strip of 1/2" by 1/4" flat steel , welded it onto the edge, ground it flat, and then painted everything black (also finally painted the previous modifications to the plow I made, which was to make the end 10" or so removable, and some extensions to the plow so it holds more snow).
Tomorrow I'll hunt down the bolts for the new plastic wear bar I bought it, and install it.
Have to get cracking on it, as snow is on the way in the next couple of days...
And my mower-brush project is delayed, as somehow while I replaced the seal on the governor shaft for it's engine, one of the parts for the governor inside the motor decided to fail.